MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 123)

100

101

TM 5-4310-452-14

4-32. BLOWER ASSEMBLY FAN MAINTENANCE (Con't).

2. Remove bolt (4), nut (1), and 2 washers (2). Remove blower assembly (3).

b. DISASSEMBLY

1. Remove bolt (15), nut (7), and pulley (14) from blower assembly (3).

2. Remove bottom roller (8) from blower assembly (3).

3. Remove spring tension clip (13), shaft (11), outer bearing (12), sleeve bushing (10), and inner bearing (9) from

blower assembly (3).

c. ASSEMBLY

1. Install inner bearing (9) with closed side facing away in blower assembly (3).

2. Install sleeve bushing (10) and shaft (11).

3. Fill bore in blower assembly (3) approximately 1/2-full with grease.

4. Install outer bearing (12) on shaft (11) in blower assembly (3) with open side of outer bearing facing in.

5. Install spring tension clip (13) in blower assembly (3).

6. Position bottom roller (8) and pulley (14) in place on ends of shaft (11). Install bolt (15) and nut (7).

TA505454

4-60

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

MAC TOOLS MW250 Betriebsanleitung Seite 123

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250