MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 225)

100

101

TM 5-4310-452-14

4-85. COMPRESSOR OIL FILTER ASSEMBLY REPLACEMENT.

THIS TASK COVERS

a. Removal b. Installation

INITIAL SETUP

Equipment Conditions: Materials/Parts:

• Engine off. • Three preformed packings

• Right door assembly open. • Four lockwashers

• Compressor oil filter element removed (see para-

graph 4-84). Tools/Test Equipment:

• General mechanic's tool kit

a. REMOVAL

1. Disconnect hose assembly (15) from elbow (14). Remove elbow and preformed packing (13) from filter head

(12). Discard preformed packing.

2. Disconnect tube assembly (6) from adapter (7). Remove adapter and preformed packing (8) from filter head

(12). Discard preformed packing.

3. Disconnect hose assembly (9) from elbow (10). Remove elbow and preformed packing (11) from filter head (12).

Discard preformed packing.

4. Remove 4 capscrews (3), lockwashers (2), and filter head (12) from bracket (1). Discard lockwashers.

5. Remove 2 screws (4), nuts (5), and bracket (1) from rear wall baffle.

b. INSTALLATION

1. Install bracket (1) on rear wall baffle with 2 screws (4) and nuts (5).

2. Install filter head (12) on bracket (1) with 4 capscrews (3) and new lockwashers (2).

3. Install elbow (14) and new preformed packing (13) on filter head (12). Connect hose assembly (15) to elbow.

4. Install adapter (7) and new preformed packing (8) on filter head (12). Connect tube assembly (6) to adapter.

5. Install elbow (10) and new preformed packing (11) on filter head (12). Connect hose assembly (9) to elbow.

4-168

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

MAC TOOLS MW250 Betriebsanleitung Seite 225

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250