MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 215)

100

101

TM 5-4310-452-14

4-79. TOOL BOX MAINTENANCE (Con't).

b. DISASSEMBLY OF TOOL BOX

NOTE

• To disassemble front tool boxes, begin with step 1.

• To disassemble rear tool boxes, go to step 3.

1. Remove chock (17) from retaining strap (20).

Remove 2 bolts (19), nuts (18), and retaining strap

from tool box (8).

2. Remove screw (23), tie-down strap (24), washer

(22), and nut (21) from retaining strap (20).

3. Remove 5 screws (3), nuts (5), and cover (2) from

tool box (8).

4. Remove 4 screws (9), nuts (1), and light shield (12)

from tool box (8).

5. Remove 2 capscrews (16), lid supports (13), self-

locking nuts (14), and 4 spring washers (15) from

tool box (8). Discard self-locking nuts.

6. Remove electrical bushing (11) from tool box (8) .

c. ASSEMBLY OF TOOL BOX

1. Install electrical bushing (11) in tool box (8).

2, Install 2 lid supports (13), new self-locking nuts (14), and 4 spring washers (15) on capscrews (16) in tool box (8) .

3. Install 4 screws (9), nuts (1), and light shield (12) in tool box (8).

4. Install 5 screws (3), nuts (5), and cover (2) on tool box (8),

5. Install screw (23), nut (21), washer (22), and tie-down strap (24) on retaining strap (20).

6. Position retaining strap (20) in place on tool box (8) and install 2 bolts (19) and nuts (18). Install chock in retaining

strap and secure with tie-down strap (24).

TA505523

4-157

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 404 405

MAC TOOLS MW250 Betriebsanleitung Seite 215

Kommentare zu diesen Handbüchern

MAC TOOLS MW250 Betriebsanleitung Seite 215

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250