MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 356)

100

101

TM 5-4310-452-14

5-35. AIR COMPRESSOR MAINTENANCE (Con't).

12. Remove seal (26) from shaft and bearing cover (25). Discard seal.

13. Remove plug (29) from housing (9).

c. ASSEMBLY

1. Install plug (29) in housing (9).

NOTE

Front part of seal must be installed on shaft and rear part of seal on bearing cover.

2. Install new seal (26) on shaft and in bearing cover (25).

3. Install retaining ring (23) and new preformed packing (28) on bearing cover (25).

4. Align mounting holes in bearing cover (25) and shims (27) and install on housing (9) with 4 screws (24). Tighten

screws to 32 lb. -ft. (43 N•m).

5. Install new preformed packing (19) on bearing cover (21). Align mounting holes in bearing cover and shims (20)

and install on housing (9) with 4 screws (22). Tighten screws to 32 lb. -ft. (43 N•m).

6. Install retaining plate (17), bearing (15), and rear part of shaft new seal assembly (13) on shaft (18). Install shaft

in gear case (4).

TA505606

5-86

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

MAC TOOLS MW250 Betriebsanleitung Seite 356

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250