MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 224)

100

101

TM 5-4310-452-14

4-84. COMPRESSOR OIL FILTER ELEMENT REPLACEMENT.

THIS TASK COVERS

a. Removal b. Installation

INITIAL SETUP

Equipment Conditions: Materials/Parts:

• Engine off. • Lubricating oil (Item 9, Appendix E)

• Air pressure relieved. • One oil filter element

• Right door assembly open.

References:

Tools/Test Equipment: • LO 5-4310-452-12

• General mechanic's tool kit

a. REMOVAL

1. Remove compressor oil filter element (3) and gasket (2) from filter head (1). Discard oil filter element and

gasket.

b. INSTALLATION

1. Apply a thin coat of lubricating oil on new gasket

(2).

2. Install new oil filter element (3) and gasket (2)

on filter head (1) until gasket contacts filter

head, then tighten 3/4-turn more.

3. Check compressor oil level in sight gage and fill

if necessary (see LO 5-4310-452-12).

4. Start engine and check oil filter element (3) for

leaks (see paragraph 2-12).

TA 505531

FOLLOW-ON TASKS:

• Close right door assembly.

4-167

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

MAC TOOLS MW250 Betriebsanleitung Seite 224

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250