MAC TOOLS MW250 Betriebsanleitung PDF herunterladen (Seite 37)

100

101

TM 5-4310-452-14

Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) (Con't).

B-Before D-During A-After W-Weekly

Interval ITEM TO BE INSPECTED Equipment is

Item PROCEDURE: Check for and have repaired Not Ready

No. B D A W filled or adjusted as needed Available If:

5 ENGINE CRANKCASE

CAUTION

To prevent engine damage, engine oil level

should be checked twice daily until engine

exceeds 200 hours of operation.

NOTE

Compressor unit must be level to perform

this check.

• Check engine oil level on dipstick. Oil level should be Oil level is below 'ADD" mark.

between 'ADD" and 'FULL" marks.

6 AIR CLEANER ASSEMBLY

• Visually check restriction indicator for a green condi-

tion. If indicator shows a red condition, clean air

cleaner (see paragraph 3-4).

7 DRAWBAR

• Visually check for excessive wear, cracks, or broken Drawbar is cracked or broken.

parts. Check that lunette mounting bolts are not Nuts or bolts are loose, bent, or

loose, missing, or bent. missing.

8 BRAKES, AIR LINE/HOSES

• Check air line/hoses for obvious damage. Air line/hose(s) are broken or

missing.

9 BRAKE MASTER CYLINDER FLUID RESERVOIR

• Check brake fluid level in reservoir (1). Level should

be within Y in. (6 mm) of top. If level is low, notify

your supervisor.

TA05398

2-10

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

MAC TOOLS MW250 Betriebsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem MAC TOOLS MW250